Skip to main content

Troubleshooting

Introduction to Troubleshooting

Troubleshooting the Element Installer comes down to knowing a little bit about kubernetes and how to check the status of the various resources. This guide will walk you through some of the initial steps that you'll want to take when things are going wrong.

install.sh problems

Sometimes there will be problems when running the ansible-playbook portion of the installer. When this happens, you can increase the verbosity of ansible logging by editing .ansible.rc in the installer directory and setting:

export ANSIBLE_DEBUG=true
export ANSIBLE_VERBOSITY=4

and re-running the installer. This will generate quite verbose output, but that typically will help pinpoint what the actual problem with the installer is.

Problems post-installation

Checking Pod Status and Getting Logs

  • In general, a well-functioning Element stack has at it's minimum the following containers (or pods in kubernetes language) running:

    [user@element2 ~]$ kubectl get pods -n element-onprem
    NAME                                        READY   STATUS    RESTARTS      AGE
    instance-synapse-main-0                     1/1     Running   4 (27h ago)   6d21h
    postgres-0                                  1/1     Running   2 (27h ago)   6d21h
    app-element-web-688489b777-v7l2m            1/1     Running   6 (27h ago)   6d22h
    server-well-known-55bdb6b66-m8px6           1/1     Running   2 (27h ago)   6d21h
    instance-synapse-haproxy-554bd57975-z2ppv   1/1     Running   3 (27h ago)   6d21h
    

    The above kubectl get pods -n element-onprem is the first place to start. You'll notice in the above, all of the pods are in the Running status and this indicates that all should be well. If the state is anything other than "Running" or "Creating", then you'll want to grab logs for those pods. To grab the logs for a pod, run:

    kubectl logs -n element-onprem <pod name>
    

    replacing <pod name> with the actual pod name. If we wanted to get the logs from synapse, the specific syntax would be:

    kubectl logs -n element-onprem instance-synapse-main-0
    

    and this would generate logs similar to:

     2022-05-03 17:46:33,333 - synapse.util.caches.lrucache - 154 - INFO - LruCache._expire_old_entries-2887 - Dropped 0 items from caches
    2022-05-03 17:46:33,375 - synapse.storage.databases.main.metrics - 471 - INFO - generate_user_daily_visits-289 - Calling _generate_user_daily_visits
    2022-05-03 17:46:58,424 - synapse.metrics._gc - 118 - INFO - sentinel - Collecting gc 1
    2022-05-03 17:47:03,334 - synapse.util.caches.lrucache - 154 - INFO - LruCache._expire_old_entries-2888 - Dropped 0 items from caches
    2022-05-03 17:47:33,333 - synapse.util.caches.lrucache - 154 - INFO - LruCache._expire_old_entries-2889 - Dropped 0 items from caches
    2022-05-03 17:48:03,333 - synapse.util.caches.lrucache - 154 - INFO - LruCache._expire_old_entries-2890 - Dropped 0 items from caches
    
  • Again, for every pod not in the Running or Creating status, you'll want to use the above procedure to get the logs for Element to look at.

  • If you don't have any pods in the element-onprem namespace as indicated by running the above command, then you should run:

    [user@element2 ~]$ kubectl get pods -A
    NAMESPACE            NAME                                         READY   STATUS    RESTARTS       AGE
    container-registry   registry-5f697bb7df-dbzpq                    1/1     Running   6 (27h ago)    6d22h
    kube-system          dashboard-metrics-scraper-69d9497b54-hdrdq   1/1     Running   6 (27h ago)    6d22h
    kube-system          hostpath-provisioner-7764447d7c-jckkc        1/1     Running   11 (17h ago)   6d22h
    element-onprem       instance-synapse-main-0                      1/1     Running   4 (27h ago)    6d22h
    element-onprem       postgres-0                                   1/1     Running   2 (27h ago)    6d22h
    element-onprem       app-element-web-688489b777-v7l2m             1/1     Running   6 (27h ago)    6d22h
    element-onprem       server-well-known-55bdb6b66-m8px6            1/1     Running   2 (27h ago)    6d21h
    kube-system          calico-kube-controllers-6966456d6b-x4scn     1/1     Running   6 (27h ago)    6d22h
    element-onprem       instance-synapse-haproxy-554bd57975-z2ppv    1/1     Running   3 (27h ago)    6d21h
    kube-system          calico-node-l28tp                            1/1     Running   6 (27h ago)    6d22h
    kube-system          coredns-64c6478b6c-h5jp4                     1/1     Running   6 (27h ago)    6d22h
    ingress              nginx-ingress-microk8s-controller-n6wmk      1/1     Running   6 (27h ago)    6d22h
    operator-onprem      osdk-controller-manager-5f9d86f765-t2kn9     2/2     Running   9 (17h ago)    6d22h
    kube-system          metrics-server-679c5f986d-msfc5              1/1     Running   6 (27h ago)    6d22h
    kube-system          kubernetes-dashboard-585bdb5648-vrn42        1/1     Running   10 (17h ago)   6d22h
    
  • This is the output from a healthy system, but if you have any of these pods not in the Running or Creating state, then please gather logs using the following syntax:

    kubectl logs -n <namespace> <pod name>
    
  • So to gather logs for the kubernetes ingress, you would run:

    kubectl logs -n ingress nginx-ingress-microk8s-controller-n6wmk
    

    and you would see logs similar to:

    I0502 14:15:08.467258       6 leaderelection.go:248] attempting to acquire leader lease ingress/ingress-controller-leader...
    I0502 14:15:08.467587       6 controller.go:155] "Configuration changes detected, backend reload required"
    I0502 14:15:08.481539       6 leaderelection.go:258] successfully acquired lease ingress/ingress-controller-leader
    I0502 14:15:08.481656       6 status.go:84] "New leader elected" identity="nginx-ingress-microk8s-controller-n6wmk"
    I0502 14:15:08.515623       6 controller.go:172] "Backend successfully reloaded"
    I0502 14:15:08.515681       6 controller.go:183] "Initial sync, sleeping for 1 second"
    I0502 14:15:08.515705       6 event.go:282] Event(v1.ObjectReference{Kind:"Pod", Namespace:"ingress", Name:"nginx-ingress-microk8s-controller-n6wmk", UID:"548d9478-094e-4a19-ba61-284b60152b85", APIVersion:"v1", ResourceVersion:"524688", FieldPath:""}): type: 'Normal' reason: 'RELOAD' NGINX reload triggered due to a change in configuration
    

    Again, for all pods not in the Running or Creating state, please use the above method to get log data to send to Element.

Other Commands of Interest

Some other commands that may yield some interesting data while troubleshooting are:

  • Show all persistent volumes and persistent volume claims for the element-onprem namespace:

    kubectl get pv -n element-onprem
    

    This will give you output similar to:

    NAME                                       CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS   CLAIM                               STORAGECLASS        REASON   AGE
    pvc-9fc3bc29-2e5d-4b88-a9cd-a4c855352404   20Gi       RWX            Delete           Bound    container-registry/registry-claim   microk8s-hostpath            55d
    synapse-media                              50Gi       RWO            Delete           Bound    element-onprem/synapse-media        microk8s-hostpath            7d
    postgres                                   5Gi        RWO            Delete           Bound    element-onprem/postgres             microk8s-hostpath            7d
    
  • Show the synapse configuration:

    kubectl describe cm -n element-onprem instance-synapse-shared
    

    and this will return output similar to:

    send_federation: True
    start_pushers: True
    turn_allow_guests: true
    turn_shared_secret: n0t4ctuAllymatr1Xd0TorgSshar3d5ecret4obvIousreAsons
    turn_uris:
    - turns:turn.matrix.org?transport=udp
    - turns:turn.matrix.org?transport=tcp
    turn_user_lifetime: 86400000
    
  • Show the Element Web configuration:

    kubectl describe cm -n element-onprem app-element-web
    

    and this will return output similar to:

    config.json:
    ----
    {
        "default_server_config": {
            "m.homeserver": {
                "base_url": "https://synapse2.local",
                "server_name": "local"
            } 
      },
      "dummy_end": "placeholder",
      "integrations_jitsi_widget_url": "https://dimension.element2.local/widgets/jitsi",
      "integrations_rest_url": "https://dimension.element2.local/api/v1/scalar",
      "integrations_ui_url": "https://dimension.element2.local/element",
      "integrations_widgets_urls": [
          "https://dimension.element2.local/widgets"
      ]
    }
    
  • Show the nginx configuration for Element Web: (If using nginx as your ingress controller in production or using the PoC installer.)

    kubectl describe cm -n element-onprem app-element-web-nginx
    

    and this will return output similar to:

      server {
          listen       8080;
    
          add_header X-Frame-Options SAMEORIGIN;
          add_header X-Content-Type-Options nosniff;
          add_header X-XSS-Protection "1; mode=block";
          add_header Content-Security-Policy "frame-ancestors 'self'";
          add_header X-Robots-Tag "noindex, nofollow, noarchive, noimageindex";
    
          location / {
              root   /usr/share/nginx/html;
              index  index.html index.htm;
    
              charset utf-8;
          }
      }
    
  • Check list of active kubernetes events:

    kubectl get events -A
    

    You will see a list of events or the message No resources found.

  • Show the state of services in the element-onprem namespace:

    kubectl get services -n element-onprem
    

    This should return output similar to:

    NAME                             TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)                    AGE
    postgres                         ClusterIP   10.152.183.47    <none>        5432/TCP                   6d23h
    app-element-web                  ClusterIP   10.152.183.60    <none>        80/TCP                     6d23h
    server-well-known                ClusterIP   10.152.183.185   <none>        80/TCP                     6d23h
    instance-synapse-main-headless   ClusterIP   None             <none>        80/TCP                     6d23h
    instance-synapse-main-0          ClusterIP   10.152.183.105   <none>        80/TCP,9093/TCP,9001/TCP   6d23h
    instance-synapse-haproxy         ClusterIP   10.152.183.78    <none>        80/TCP                     6d23h
    
  • Show the status of the stateful sets in the element-onprem namespace:

    kubectl get sts -n element-onprem
    

    This should return output similar to:

    NAME                    READY   AGE
    postgres                1/1     6d23h
    instance-synapse-main   1/1     6d23h
    
  • Show deployments in the element-onprem namespace:

    kubectl get deploy -n element-onprem
    

    This will return output similar to:

    NAME                       READY   UP-TO-DATE   AVAILABLE   AGE
    app-element-web            1/1     1            1           6d23h
    server-well-known          1/1     1            1           6d23h
    instance-synapse-haproxy   1/1     1            1           6d23h
    
  • Show the status of all namespaces:

    kubectl get namespaces
    

    which will return output similar to:

    NAME                 STATUS   AGE
    kube-system          Active   20d
    kube-public          Active   20d
    kube-node-lease      Active   20d
    default              Active   20d
    ingress              Active   6d23h
    container-registry   Active   6d23h
    operator-onprem      Active   6d23h
    element-onprem       Active   6d23h
    
  • Destroy the micro8ks setup

    If you wish to start over, you can reset the microk8s setup by doing:

    microk8s.reset --destroy-storage
    

    WARNING: This will destroy all of your microk8s containers and storage. Use with caution.